2 Wire Conversion options for EMV

Look here for answers to your technical questions. Post a question or share your expertise with others.
3rdrock
Head Tech
Posts: 40
Joined: Fri Feb 08, 2008 8:38 am

Re: 2 Wire Conversion options for EMV

Post by 3rdrock » Mon Aug 05, 2019 1:49 pm

AvaLAN is very easy to install and setup. We installed the outdoor box on the left side of the Wayne Ovation 2 using the stock hole on the left side of the column.Use your bolt and nut. A power wire goes into the SPM and plugs into the box and the (B) cable goes to the LAN switch marked server. Inside the box mounted to the wall, and hooks to the Cisco switch and followed the instructions to link the dispenser boxes. Done. Not line of sight at this location. Hooked up a KVM and saw all 4 dispensers online to the GW and called NOC. :D
https://www.dropbox.com/s/walrk7rkkhvds ... .jpeg?dl=0
https://www.dropbox.com/s/z4wycs7kvc40m ... .jpeg?dl=0
https://www.dropbox.com/s/a1zkgmneaiqzx ... .jpeg?dl=0








3rdrock wrote:
Fri Jul 19, 2019 1:09 pm
I will know about AvaLAN shortly. We have 1 site coming up and I will let you know how it goes. :?:
I just did a search and found both post about AvaLAN. :shock:

KirillXE
Newbie
Posts: 1
Joined: Thu Feb 21, 2019 8:50 am

2 Wire Conversion options for EMV

Post by KirillXE » Mon Aug 12, 2019 1:53 am

Ive been looking to convert a Suncom stick for use with my Gladiator Mk. II. How does the 3-Pin connection work? Power, Ground and Input?

3rdrock
Head Tech
Posts: 40
Joined: Fri Feb 08, 2008 8:38 am

Re: 2 Wire Conversion options for EMV

Post by 3rdrock » Thu Aug 15, 2019 2:40 pm


jjames
Head Tech
Posts: 43
Joined: Tue May 09, 2017 3:03 pm

Re: 2 Wire Conversion options for EMV

Post by jjames » Mon Aug 19, 2019 4:52 pm

3rdrock wrote:
Thu Aug 15, 2019 2:40 pm
https://www.avalan.com/hubfs/EMV-AP-SU-USER-MANUAL.pdf

This is the one I installed.
Thanks for the info and glad it worked for you.

westgate1
Newbie
Posts: 4
Joined: Wed Apr 15, 2015 8:06 am

Re: 2 Wire Conversion options for EMV

Post by westgate1 » Tue Sep 17, 2019 3:22 pm

Does the AvaLan eliminate the BRCM (Back room control Module)?


Comprob
Pump Jockey
Posts: 5
Joined: Tue Sep 17, 2019 11:40 am
Location: Yemen
Contact:

2 Wire Conversion options for EMV

Post by Comprob » Thu Oct 03, 2019 11:07 pm

Just installed new retrofit card readers kits to my dispensers and to enable EMV I have to install CAT5 cabling.
Do I need to install a special CAT5 wiring water resistant/oil resistant or can I just use standard CAT5?

DemenchukUJ
Newbie
Posts: 1
Joined: Sat Mar 02, 2019 6:20 am

2 Wire Conversion options for EMV

Post by DemenchukUJ » Fri Oct 04, 2019 2:26 am

I’ve searched everywhere and there’s nothing documented in the box.

When looking at the grip from underneath there is a small hex screw that you can remove that appears to serve no purpose.

What is it for?

I am not referring to the grip tightening assembly

Thanks


Post Reply