Red board Colour qvga R2 dual sign software update.

Look here for answers to your technical questions. Post a question or share your expertise with others.
Post Reply
Hafidz07
Newbie
Posts: 4
Joined: Mon Dec 09, 2019 7:51 pm

Red board Colour qvga R2 dual sign software update.

Post by Hafidz07 » Mon Jan 13, 2020 9:35 am

Hi guys.. im tech from Malaysia. Now i had a problem with SPM sha2 replacement. Wayne provide me with the dual sign qvga software that didn't work. Can help me to find this Red board qvga dual sign software. Relly appreciate ur help.. i had almost 100 cases of breach spm.. tq in advance.

dmcginnis89
Head Tech
Posts: 611
Joined: Wed Feb 26, 2014 3:36 am

Re: Red board Colour qvga R2 dual sign software update.

Post by dmcginnis89 » Mon Jan 13, 2020 7:32 pm

With some versions of software, you can't upgrade/reload software with a breached SPM or an SPM that's in "waiting for install" mode...you'll need to either use a debug cable and reset it, then upgrade the software, or put in a working SPM, put it in operation then upgrade the software.

If you don't have a debug cable, you have to find an operational SPM, put the board in that pump and updrade the software.

Good luck.

Post Reply