Wayne pump is stopping middle of fueling

patelsvc · Post by **patelsvc** » Fri Sep 24, 2021 4:12 pm

one of fueling point is stopping middle of the fill up. it doing on either of prepay or pay at the pump. please help.

xardoz · Post by **xardoz** » Fri Sep 24, 2021 4:41 pm

Check Error Codes

patelsvc · Post by **patelsvc** » Sat Sep 25, 2021 10:37 am

How do I check error code on Wayne ovation B12 pump?

HWE · Post by **HWE** » Mon Sep 27, 2021 12:38 pm

You will need a Service remote control or the Wayne Servterm software to read the codes.
If you do have neither, a Wayne authorized service organization will be able to assist.

patelsvc · Post by **patelsvc** » Mon Sep 27, 2021 8:52 pm

On a fueling point DCR, used two second arrows(Left side and Right side) pressed same time, enter access code and went to diagnostics menu, and cancel it. DCR got reloaded automatically, and it started working.

Thank you all

1onemarty · Post by **1onemarty** » Mon Sep 27, 2021 9:49 pm

I always do a simple reboot when a piece of equipment is doing something funny, and then do further testing from there.

Petroleum Equipment Forum

Wayne pump is stopping middle of fueling

Wayne pump is stopping middle of fueling

Re: Wayne pump is stopping middle of fueling

Re: Wayne pump is stopping middle of fueling

Re: Wayne pump is stopping middle of fueling

Re: Wayne pump is stopping middle of fueling

Re: Wayne pump is stopping middle of fueling