NCR POS and Wayne Ovation

Look here for answers to your technical questions. Post a question or share your expertise with others.
maverick
Pump Jockey
Posts: 7
Joined: Sun Feb 27, 2005 1:45 pm
Location: Virginia

NCR POS and Wayne Ovation

Post by maverick » Mon Nov 28, 2016 2:54 pm

I have an installation starting with Wayne Ovation 2 dispensers, with InOvation TV and Secure Card readers, and an NCR Pos. I have searched, with no luck, for documents on the needed configuration to interface the two. Anyone have any knowledge they would be willing to share, will provide private contact info if desired so these pesky trade secrets aren't revealed to everyone. Thanks in advance for any assistance.
Ed

veritech10
Head Tech
Posts: 62
Joined: Thu Jan 14, 2010 3:31 am

Re: NCR POS and Wayne Ovation

Post by veritech10 » Mon Nov 28, 2016 6:14 pm

Will need universal dbox with wayne and a nexgen

dmcginnis89
Head Tech
Posts: 609
Joined: Wed Feb 26, 2014 3:36 am

Re: NCR POS and Wayne Ovation

Post by dmcginnis89 » Mon Nov 28, 2016 6:58 pm

veritech10 wrote:Will need universal dbox with wayne and a nexgen
All the ones we've done have been with Tiger/Panther, and a Wayne Connect...couple new sites had ethernet, so we used a switch instead.

maverick
Pump Jockey
Posts: 7
Joined: Sun Feb 27, 2005 1:45 pm
Location: Virginia

Re: NCR POS and Wayne Ovation

Post by maverick » Tue Nov 29, 2016 8:05 am

I have the Wayne Connect and RS 485 for the InOvation TV. Am picking up a Universal D-Box this morning as well. Do not have a Panther or Nexgen, only a Gilbarco Enhanced Dispenser Hub. Have found a contact at NCR that has asked for more information so waiting to see what he comes back with once I provide. Thank you for the replies. Will update as soon as I find out what is needed in this case.
Ed

veritech10
Head Tech
Posts: 62
Joined: Thu Jan 14, 2010 3:31 am

Re: NCR POS and Wayne Ovation

Post by veritech10 » Tue Nov 29, 2016 8:12 am

Tiger is for radiant point of sale. Ncr uses nexgen and dbox


User avatar
xardoz
Head Tech
Posts: 1186
Joined: Fri Jan 04, 2008 1:31 pm
Location: Chehalis, WA
Contact:

Re: NCR POS and Wayne Ovation

Post by xardoz » Tue Nov 29, 2016 7:03 pm

I thought Radient was NCR
https://online.hillsdale.edu

Any society that would give up a little liberty to gain a little security will deserve neither and lose both.
Benjamin Franklin

veritech10
Head Tech
Posts: 62
Joined: Thu Jan 14, 2010 3:31 am

Re: NCR POS and Wayne Ovation

Post by veritech10 » Tue Nov 29, 2016 10:14 pm

I havent paid much attention i havent seen the ncr logos appended to radiant. I know all.of the radiants ive had dealings with use tiger or the new panther box . Maybe radiant is a subsidiary of them.

dmcginnis89
Head Tech
Posts: 609
Joined: Wed Feb 26, 2014 3:36 am

Re: NCR POS and Wayne Ovation

Post by dmcginnis89 » Tue Nov 29, 2016 10:18 pm

xardoz wrote:I thought Radient was NCR
Me too...lol.

veritech10
Head Tech
Posts: 62
Joined: Thu Jan 14, 2010 3:31 am

Re: NCR POS and Wayne Ovation

Post by veritech10 » Wed Nov 30, 2016 8:31 am

Im also speculating on ncr point of sale that runs retalix software

User avatar
cantdrive55
Head Tech
Posts: 455
Joined: Thu Mar 19, 2009 5:57 am
Contact:

Re: NCR POS and Wayne Ovation

Post by cantdrive55 » Wed Nov 30, 2016 9:57 am

I have 3 sites running Ovations and Gilbarco EDH for 7-Eleven NCRs. Gilbarco does all the programming of the EDH but you need a Gilbarco ASO to set it up.

Post Reply