Page 1 of 1

Red board Colour qvga R2 dual sign software update.

Posted: Mon Jan 13, 2020 9:35 am
by Hafidz07
Hi guys.. im tech from Malaysia. Now i had a problem with SPM sha2 replacement. Wayne provide me with the dual sign qvga software that didn't work. Can help me to find this Red board qvga dual sign software. Relly appreciate ur help.. i had almost 100 cases of breach spm.. tq in advance.

Re: Red board Colour qvga R2 dual sign software update.

Posted: Mon Jan 13, 2020 7:32 pm
by dmcginnis89
With some versions of software, you can't upgrade/reload software with a breached SPM or an SPM that's in "waiting for install" mode...you'll need to either use a debug cable and reset it, then upgrade the software, or put in a working SPM, put it in operation then upgrade the software.

If you don't have a debug cable, you have to find an operational SPM, put the board in that pump and updrade the software.

Good luck.