Please pay inside

Look here for answers to your technical questions. Post a question or share your expertise with others.
Post Reply
jgar477
Head Tech
Posts: 51
Joined: Tue May 01, 2007 2:52 am

Please pay inside

Post by jgar477 » Thu Jul 02, 2020 6:51 am

Have a citgo location where we installed two new ovation 2s. Non emv for right now. They are pumps 3/4 and 6/7. Pumps 1/2 and 5 are selects running diesel and kerosene. The old pumps were some old vistas I believe.
Might have been dl's.

Pump 6 keeps showing please pay inside after the jade board does its nightly reboot and will not recover until the site reinitializes dcrs.

The commander has the latest version of citgo vaps software and the jade boards have the latest version of epp software.

The dcr configuration is the same on all pumps. Primary graphic side is set to 6. Anybody ever run into this before?

dmcginnis89
Head Tech
Posts: 615
Joined: Wed Feb 26, 2014 3:36 am

Re: Please pay inside

Post by dmcginnis89 » Thu Jul 02, 2020 7:09 am

wayne pumps do NOT need a primary graphic side programmed. Change them all to 0 and initialize DCRs and you should be good to go

javamelt
Head Tech
Posts: 64
Joined: Fri Nov 27, 2015 10:34 am

Re: Please pay inside

Post by javamelt » Fri Jul 03, 2020 8:13 pm

dmcginnis89 wrote:
Thu Jul 02, 2020 7:09 am
wayne pumps do NOT need a primary graphic side programmed. Change them all to 0 and initialize DCRs and you should be good to go
Do what he said.
So you work 40 hour weeks, I remember my first part time job! :lol:

RossD
Head Tech
Posts: 242
Joined: Sat Nov 13, 2004 1:57 am
Location: Nevada

Re: Please pay inside

Post by RossD » Sun Jul 05, 2020 5:11 pm

I will 3rd that.
:roll:

Post Reply