premier B error 4

Look here for answers to your technical questions. Post a question or share your expertise with others.
Post Reply
mj1964
Head Tech
Posts: 26
Joined: Thu Feb 04, 2010 1:00 am

premier B error 4

Post by mj1964 » Thu Feb 15, 2018 8:55 am

error 4 is for blenders only bad sale limit is reached check F21 for limit, but I checked the programming for F21 it say dual phase pulser must be on use the CPU dip switch. I have that switch off does that disable the bad sale and dispenser error limits altogether ?????

jberthi2
Head Tech
Posts: 352
Joined: Thu Jul 05, 2007 1:20 pm
Location: Phoenix, az

Re: premier B error 4

Post by jberthi2 » Fri Feb 16, 2018 7:13 am

Don't remember but I think so. But why would you want to? Ignoring errors will only get you in trouble. Replace CPU, interface board, blend board, or pulsers.

pumpguy55
Head Tech
Posts: 489
Joined: Thu May 20, 2010 9:22 am

Re: premier B error 4

Post by pumpguy55 » Sat Feb 17, 2018 2:34 pm

mj1964 wrote:
Thu Feb 15, 2018 8:55 am
error 4 is for blenders only bad sale limit is reached check F21 for limit, but I checked the programming for F21 it say dual phase pulser must be on use the CPU dip switch. I have that switch off does that disable the bad sale and dispenser error limits altogether ?????
Always have that switch on. Try photocoupler first, connection may need to be reversed, you will know when it fails immediately.

Post Reply