lower permeability hoses for fuel dispensing required by Counties?
lower permeability hoses for fuel dispensing required by Counties?
Good afternoon, does anyone have a link, and web site that can let suppliers and or designer know if Low permeability hose and hardware is required? A number of years ago we have sites for the old Stage 2 systems and location where that system was required, but the hose requirement does not seam to have the same traction as the stage 2 did and is hard to find the rules /locations where it s required. California (the entire state requires it with stage 2. Any other known areas?
-
- Head Tech
- Posts: 1183
- Joined: Sun Jul 15, 2007 10:53 am
- Location: Atlanta/Phoenix/Sacramento
Re: lower permeability hoses for fuel dispensing required by Counties?
Ohio.
Source has a state by state selection map on their web site. Most curb hoses today are "Low Permeability" and have been for a number of years. Goodyear and Franklin.
Source has a state by state selection map on their web site. Most curb hoses today are "Low Permeability" and have been for a number of years. Goodyear and Franklin.
When you are dead it's likely you won't know it. It could be difficult for others. It's the same if you are stupid.
"Tact is the ability to tell someone to go to Hell in a way that they will begin looking forward to the trip"
"Tact is the ability to tell someone to go to Hell in a way that they will begin looking forward to the trip"
Re: lower permeability hoses for fuel dispensing required by Counties?
Southwest Washington now requires them as well. Here is link to their guidelines.
https://www.swcleanair.gov/docs/regs/reg491.pdf
https://www.swcleanair.gov/docs/regs/reg491.pdf