Tkheim H322R

Look here for answers to your technical questions. Post a question or share your expertise with others.
Post Reply
bvick
Head Tech
Posts: 120
Joined: Tue Jan 22, 2013 8:06 am
Location: Sims, NC

Tkheim H322R

Post by bvick » Wed Oct 09, 2019 6:28 am

have a Tok. H322R with Wayne EMV kits, dispenser will not reset when in console mode, will get all the way thru to select grade and when you select the grade the two prices not selected show dashed like they should but no reset cycle, when I put in manual goes thru and reset? any suggestion
bvick

jberthi2
Head Tech
Posts: 476
Joined: Thu Jul 05, 2007 1:20 pm
Location: Phoenix, az

Re: Tkheim H322R

Post by jberthi2 » Wed Oct 09, 2019 7:48 am

swap Fueling point id with another, see if the problem follows the id.

bvick
Head Tech
Posts: 120
Joined: Tue Jan 22, 2013 8:06 am
Location: Sims, NC

Re: Tkheim H322R

Post by bvick » Wed Oct 09, 2019 9:52 am

already did that problem stays with the physical dispenser location
bvick

bigbadjohn
Head Tech
Posts: 189
Joined: Fri Jun 24, 2005 4:28 am

Re: Tkheim H322R

Post by bigbadjohn » Wed Oct 09, 2019 2:03 pm

Check that the blend ratios at the pump match the POS. If you have a 1 in the volume display in F26 the pump will check the ratio, and if there's a mismatch it will do exactly what you are seeing.
Red Green "If it moves and shouldn’t: duct tape. If it doesn’t move and should: WD-40."




User avatar
cantdrive55
Head Tech
Posts: 420
Joined: Thu Mar 19, 2009 5:57 am
Contact:

Re: Tokheim H322R

Post by cantdrive55 » Thu Oct 10, 2019 8:26 am

Fix it yet?


bvick
Head Tech
Posts: 120
Joined: Tue Jan 22, 2013 8:06 am
Location: Sims, NC

Re: Tkheim H322R

Post by bvick » Fri Oct 11, 2019 6:20 am

nope
bvick


Post Reply