Wayne soft breach recovery

Look here for answers to your technical questions. Post a question or share your expertise with others.
Post Reply
scotcal
Head Tech
Posts: 168
Joined: Thu Dec 22, 2005 2:12 pm

Wayne soft breach recovery

Post by scotcal » Wed Dec 04, 2019 1:32 pm

As this is new, I don't know how effective long term it is.
A Valero customer reported a red flashing link on his hybrid reader so I decided to go for the reset.

I loaded 2.4.7 on his red board per the service memo, then upgraded his SPM to 1.266 per the manual.

I put the SPM in maintenance mode and successfully reset the hybrid reader. One week later the reader breached again. I've reset it again.

There's not a lot of data out there regarding soft breaches. Seems now that I'm treating a symptom and not the cause......

smellslikegas
Head Tech
Posts: 333
Joined: Fri Jun 13, 2008 12:33 pm

Re: Wayne soft breach recovery

Post by smellslikegas » Wed Dec 04, 2019 6:18 pm

We have done several, only had one come back with a soft breach. Reset it again and as far as I know, it has not come back.
I can't fix stupid, But I can sure charge for it.

Post Reply