Encore 700 dispenser keeps recycling power during fueling.

Look here for answers to your technical questions. Post a question or share your expertise with others.
Post Reply
Mleyva211
Newbie
Posts: 1
Joined: Tue Mar 17, 2020 4:06 pm

Encore 700 dispenser keeps recycling power during fueling.

Post by Mleyva211 » Tue Mar 17, 2020 4:28 pm

I’ve had this problem for about a month, some times when a customer uses the dispenser on either side the dispenser recycles power. It’s not every customer that does it. It will recycle power if a customer pays in side or at the pump. I’ve already changed the power supply, both door nodes, I’ve changed the pump relay board, I’ve swapped the pump cpu from one pump to another to see if the problem moves. It doesn’t. I’ve also changed out the Healy module to see if that helps, nothing. I found water damage to the PPU display, replaced it with a new one, installed new cables. The problem still continues. I have no idea what else to check for. Does anyone have any tips or other ideas that I’m not seeing? Please help!

Post Reply